Skip to main content

(413) 499-0294   FREE Shipping on Orders over $100

Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Tools & Tuning

$20.00
Comfortable retaining of all ski brake models - 4 bands
$3.00
Transparent polyethylene sticks for repairing ski bases. Easy to work with. Ø 6 mm. 4 sticks per pack. First clean the damaged area in the base and scrape out any loose residue. Heat the polystick and drip into the damaged area in the base. Let it cool down and scrape away the excess with a steel scraper, or panzer file if necessary, and polish over with Fibertex for a fine finish. - Polyethylene Stick - For repairing ski bases - For racing service and ski workshops - Easy to work with
$6.00
Natural cork for polishing Cera F and glide wax. Used to cork wax into the base.
$7.00
It is important that the scraper is sharp at all times. This makes it easy and effective to work on the base surface. The less sharp the scraper is, the more pressure is required. This may negatively affect the properties of the base. Sharpen the scraper using Swix T0408, T410 and T412-220. - Base Preparation
$7.95
Synthetic cork for kick wax. This synthetic cork has a higher density than a regular synthetic cork. For racing.
$8.00
It is important that the scraper is sharp at all times. This makes it easy and effective to work on the base surface. The less sharp the scraper is, the more pressure is required. This may negatively affect the properties of the base. Sharpen the scraper using Swix T0408, T410 and T412-220.
$11.00
The UR range is a range of fluoro-free glide wax for training and racing. - A hard glide wax - For cold conditions - For those who want a better skiing experience - High durability
$12.00
Fluor Free Hydrocarbon wax -5°C to -10°C. Good training wax in cold condition. Easy to warm in. Good in dry conditions. - An undisputed favorite in cold conditions - Hard and durable, yet easy to apply - A favorite both in alpine and XC Temperature range from -5°C to -10°C (23°F to 14°F). Recommended iron temp.: 145°C (293°F). Our std. CH6 has been a success in the Cera Nova system, and through comprehensive testing we have not found anything better. It is an economic training and racing wax as well as a base prep wax for cold skis. CH06X has high durability and offer great performance in most snow conditions as well as on artificial and glacier snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax.
$12.00
Ski cleaner for cleaning ski bases and removing wax and klister. Spray on the base, remove as much wax as possible with a scraper and wipe with Fiberlene. The active ingredient in this ski cleaner is a low-aromatic hydrocarbon which has a good effect on grease and dirt. The aerosol has propellant gas that does not damage the ozone layer and the ski cleaner is less flammable and less environmentally harmful than most other ski cleaning products. Practically odorless. *Danger: Extremely flammable aerosol. Pressurized container: May burst if heated. May cause drowsiness or dizziness. Harmful to aquatic life with long-lasting effects. Repeated exposure may cause skin dryness or cracking.
$12.00
6”/15 cm. 16 tpcm. Fine. Non chromed file. Works great for side-edge beveling.
$12.00
Extra-fine Fibertex. Flint abrasive particles. White. Pack of three sandpapers 110 x 150 mm. Used on new skis and newly-structured skis to remove the smallest polyethylene microfibers. Polishes the base completely smooth and even. Also used as a final finish after using Grey Fibertex (T0264N) or Violet Fibertex (T0266N). - Nylon pad with abrasive particles - Removes microhairs from the base - For all ski waxers - Gentle and effective
$12.00
Attach the Fibertex to an oval or rectangular brush. Move the brush back and forth on the surface of the base. When the gray lining is gone, you’re done. For removing microhairs we recommend approx. 50 brush strokes back and forth. - Pack of three sandpapers 110 x 150 mm - Aluminum oxide abrasive particles
$15.00
SWIX Violet Glide is a liquid glider with a wide range around freezing. +1°C to -6°C (34°F to 22°F). For all snow conditions. A good and easy option for the skier who cares for good glide and smooth turning skis and boards with the least possible preparation time. Easy application and dries quickly! 80 ml/2.7 fl. oz. US version. Highlights: - Quick and easy to use - Easy glide - Easy application - For cold and warm conditions - Fluoro free
$15.00
PS6 is very versatile. Its area of use stretches from underlayer for powder to racing wax and base prep wax for cold skis. PS6 has good durability and offers great performance on natural and artificial snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. PS6 can be used as a race wax alone or as a base for powders and other top coats. Recommended iron temp: 145°C (293°F). - Recommended iron temp: 145°C (293°F). - Replaces the CH6X - -6°C to -12°C (21°F to 10°F).
$15.00
Extra coarse, non-chromed panzer file, 12 tpi. 100 mm x 30 mm x 4.5 mm. The file is perfect for side-edge file guides that have an integrated clamp. Used for removing irregularities on plastic sidewalls of alpine skis and snowboards.
$15.00
Used primarily for removing burrs and rounding steel edges at the front/rear area of alpine skis and snowboards.
$15.00
Extra hard rubber grinding stone for tuning and maintaining steel edges.
$15.00
Universal glide wax that quickly and easily provides great glide for skis and snowboards. - Universal glide wax - For all conditions - For those who want a better skiing experience - Easy to work with
$16.00
F4 is a universal glide wax for skis and snowboards. A wax with a wide range of uses. - Universal wax for all temperature ranges - Glide wax specifically for ski mountaineering and summer skiing - Preservative wax for metal edges - Easy application
$16.00
PS7 is a wax that performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end result. PS7 is an economic training and racing wax as well as an all-round base prep wax. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 140°C (284°F). - Recommended iron temp: 140°C (284°F). - Replaces the CH7X. - -2°C to -8°C (28°F to 18°F).
$16.00
PS8 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 130°C (266°F). - Recommended iron temp: 130°C (266°F). - Replaces the CH8X. - -4°C to +4°C (25°F to 39°F).
$16.95
F4 spray universal glide wax for skis and snowboards. A wax with a wide range of uses. - Universal wax for all temperature ranges - Easy application - Glide wax for ski mountaineering and summer skiing
$16.95
The ideal brush when applying any F4 product. White felt for spreading the F4 product evenly on the base and for polishing. The nylon for brushing and removing excess wax from the structure. This process will increase the durability of any F4 product. Good quality. - For training and competitions - Fluorine free and 100% biodegradable - Thoroughly tested on several types of conditions
$19.95
F4 universal liquid glide wax for skis and snowboards. A wax with a wide range of uses. - Universal wax for all temperature ranges - Glide wax specifically for ski mountaineering and summer skiing - Preservative wax for metal edges - Easy application
$20.00
Fluor Free The F4 series of universal gliders gives you good glide quickly and easily. - Easy wax for all conditions - No iron needed F4 Universal All Temperature Paste wax on tube. For skis and snowboards. All snow conditions. With foam applicator. Apply and go! Special tip: Use F4 Combi Brush (T0166B). Polish with the felt and then brush lightly. Based upon Future Cera® raw materials, which grant for high quality and an environmentally friendly profile.
$20.00
Gives faster skis. Cleaner & conditioner glide sections of racing skis and snowboards. - Ski Cleaner for glide zone. - For everyone who waxes their skis. Cleaner for fluoro glide wax and CH-wax. Improves glide and conditions the base. For glide sections only on all racing skis and snowboards. Involves no hard mechanical treatment of the base. No wearing of the stone grind pattern in the ski base. Makes the ski faster! Apply cleaner (I84C) with Fiberlene. Brush with white nylon brush while wet. Wipe clean with Fiberlene. Let dry for 5-30 minutes. Brush with hand steel brush (or Roto steel brush). Wax with Base Prep wax. 16.9 fl. oz.
$20.00
Medium coarse file, chrome-plated. 20 cm, 14 tpcm. Good for filing both side edges and base edges. - File for treating steel edges - For snowboards and alpine skis - For alpine skiers and ski workshops - Sharp and exact
$20.00
Medium coarse file, not chrome-plated. 20 cm, 12.5 tpcm. Good for filing both side edges and base edges. - File for treating steel edges - For snowboards and alpine skis - For all maintenance of steel edges - Sharp and exact
$24.00
Coarse Diamond Stone with plastic support. Red. 100 mm. Deburring and maintenance stone. Works great for maintaining sharpness and smoothness. Good price.
$25.00
Waxing pack for cross-country skis. - Convenient pack - For normal dry wax conditions - For those who want a better skiing experience - Everything you need to achieve good grip
Page 1 of 2 Next page