Parts

- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver

Interlok spacers nest into the lip of Cane Creek headset uppers for a rock solid, flex-free fit. - Composite construction

- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

Replacement bearing for the lower half of YST8003 #7 headset.

Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.

Dimension Anodized M5 Bolts fits most standard bottle boss and accessory mounts. - Fits most standard bottle boss and accessory mounts - Tapered socket head with 4mm broach M5 diameter bolt, 0.8mm thread pitch - 16mm thread length - Aluminium - Sold individually

Sunlite's Cable End Button replaces the worn out piece that goes between your brake cable and the brake lever body. Replacing it along with cables and housing helps add new life to your brakes and shines u the bike, too!

- Aheadset preload adjusting bolt

- Model: Replacement bolt - Compatibility: Allen, M5x16

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

- Rubber - Color: Black

- Straight gauge spokes with a proprietary grade of stainless steel that is as good or better than the materials used by the world’s most renowned spoke makers. - Sized and dimensioned specifically for BMX.

- Brake casing has internal lining and external plastic coating - Derailleur casing is compressionless with internal lining and external plastic coating

- Hoods with (FD) are Flight-Deck compatible

This is a replacement Brake Hose Cover for the Lever End of Shimano BH90-SBM, BH90-SB levers. - Covers brake hose fitting at the brake lever

• MTB or Road • 1.5 x 2667mm • Galvanized

- Replacement retaining clip for the Surly Tuggnut/Snuggnut

Grade 300 retainer bearings for headset and bottom bracket service. - 10 Retainers/Bag

- Replacement cable anchor bolt for brakes - Includes nut and washer

- Longer B-screw needed when using 40t or 42t cog with most Shimano derailleurs

KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains

- Aluminum w/lock nut and mount - Slotted mount design

- Crank dust cap - Works with most three-piece crank models

- Chrome - Sold individually

- Routes cables underneath the bottom bracket - Will not rust or corrode

- M8 Top Plate Bolt

Hope Pad Clip • Fits Tech and Tech Evo M4, X2, and V2 Brakes

- Model: Derailleur Bolt & Nut - Compatibility: Mounts rear bracket to frame

Shifting cables for Road/Mountain bikes.

Stainless steel pedal washers - Sold in pairs