Tools & Tuning

A great wax for both base-prep and training. It can also be used as a race wax, preferably used with a top coat. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 150°C (302°F). Replaces the LF8X. Highlights: - Easy to work with - For training and competition - Great performance and durability - Fluoro-free and non-toxic - Well tested on many conditions

Fluor Free Hydrocarbon wax -8°C to -14°C. Good race wax in very cold conditions. Good in dry conditions. - Durable wax for cold conditions - Can be used alone or are as underlayer for top-coats Temperature range from -8°C to -14°C (18°F to 7°F). Recommended iron temp.: 150°C (311°F). The 5 series fulfill a hardness gap between the 4 and the 6 series. It’s easier to apply than the 4 series, but provides outstanding glide properties within its temperature range, and has a great durability. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after appr. one minute. Important to have a good iron to get an efficient melting of the wax. CH05X can be used as a race wax alone, but is often used as a base for Cera F powder, such as FC05X.

Fluor Free Hydrocarbon wax -5°C to -10°C. Good training wax in cold condition. Easy to warm in. Good in dry conditions. - An undisputed favorite in cold conditions - Hard and durable, yet easy to apply - A favorite both in alpine and XC Temperature range from -5°C to -10°C (23°F to 14°F). Recommended iron temp.: 145°C (293°F). Our std. CH6 has been a success in the Cera Nova system, and through comprehensive testing we have not found anything better. It is an economic training and racing wax as well as a base prep wax for cold skis. CH06X has high durability and offer great performance in most snow conditions as well as on artificial and glacier snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax.

Great economy wax iron for alpine and nordic. Value for the money! 110 Volt. 1000 Watt. Great economy iron which is competitive with far more expensive models. Redesigned from scratch with an ergonomic body and a wide metal plate that suits both alpine, snowboard and nordic. Angled at one side to make it easier to keep a constant speed when melting the wax. The thick metal plate ensures a stable heating. Plate dimension 100x160 mm. Also available for 220 Volt (product # T77220).

Our favorite for polishing! Quality polish brushes for all waxes. Blue nylon brush. Ø 0.12 mm. A fine soft nylon brush for polishing all waxes. 5 to 10 strokes.

Steel brush. Ø 0.18 mm. Used as first brush on wax after scraping. 5-6 strokes. High quality steel brush that has had an excellent reception in racing.

HS7 performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end-result. Can be used as a racing wax at low air humidity, but will also serve the purpose as a brilliant training wax. The speed of the iron should be approx. 8-10 sec. on a skating ski or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HS7 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 150°C (302°F). Highlights: - Fantastic allround-glider - For training and competition - Great performance and durability - Fluoro-free and non-toxic - Well tested on many conditions

Fluor Free The F4 series of universal gliders gives you good glide quickly and easily. - Easy wax for all conditions - No iron needed F4 Universal All Temperature Paste wax on tube. For skis and snowboards. All snow conditions. With foam applicator. Apply and go! Special tip: Use F4 Combi Brush (T0166B). Polish with the felt and then brush lightly. Based upon Future Cera® raw materials, which grant for high quality and an environmentally friendly profile.

Gives faster skis. Cleaner & conditioner glide sections of racing skis and snowboards. - Ski Cleaner for glide zone. - For everyone who waxes their skis. Cleaner for fluoro glide wax and CH-wax. Improves glide and conditions the base. For glide sections only on all racing skis and snowboards. Involves no hard mechanical treatment of the base. No wearing of the stone grind pattern in the ski base. Makes the ski faster! Apply cleaner (I84C) with Fiberlene. Brush with white nylon brush while wet. Wipe clean with Fiberlene. Let dry for 5-30 minutes. Brush with hand steel brush (or Roto steel brush). Wax with Base Prep wax. 16.9 fl. oz.

Comfortable retaining of all ski brake models - 4 bands

The ideal brush when applying any F4 product. White felt for spreading the F4 product evenly on the base and for polishing. The nylon for brushing and removing excess wax from the structure. This process will increase the durability of any F4 product. Good quality. - For training and competitions - Fluorine free and 100% biodegradable - Thoroughly tested on several types of conditions

PS6 is very versatile. Its area of use stretches from underlayer for powder to racing wax and base prep wax for cold skis. PS6 has good durability and offers great performance on natural and artificial snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. PS6 can be used as a race wax alone or as a base for powders and other top coats. Recommended iron temp: 145°C (293°F). - Recommended iron temp: 145°C (293°F). - Replaces the CH6X - -6°C to -12°C (21°F to 10°F).

PS7 is a wax that performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end result. PS7 is an economic training and racing wax as well as an all-round base prep wax. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 140°C (284°F). - Recommended iron temp: 140°C (284°F). - Replaces the CH7X. - -2°C to -8°C (28°F to 18°F).

PS8 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 130°C (266°F). - Recommended iron temp: 130°C (266°F). - Replaces the CH8X. - -4°C to +4°C (25°F to 39°F).

Steel scraper for experienced waxers. Sharp steel scraper for peeling or straightening bases.

Synthetic cork for kick wax. This synthetic cork has a higher density than a regular synthetic cork. For racing.

Natural cork for polishing Cera F and glide wax. Used to cork wax into the base.