Tools & Tuning

Aluminum file guide for base edges, 0.75°. - File guide - For filing base edges - For alpine skiers and snowboarders - Precise

Extra-fine Fibertex. Flint abrasive particles. White. Pack of three sandpapers 110 x 150 mm. Used on new skis and newly-structured skis to remove the smallest polyethylene microfibers. Polishes the base completely smooth and even. Also used as a final finish after using Grey Fibertex (T0264N) or Violet Fibertex (T0266N). - Nylon pad with abrasive particles - Removes microhairs from the base - For all ski waxers - Gentle and effective

Liquid glide wax for racing and fast training sessions. HS7L is recommended from -2 to -8 degrees. - A very good glide wax for traditional winter conditions - No need for a waxing iron - Replaces CH7XL.

Used primarily for removing burrs and rounding steel edges at the front/rear area of alpine skis and snowboards.

Coarse Diamond Stone with plastic support. Red. 100 mm. Deburring and maintenance stone. Works great for maintaining sharpness and smoothness. Good price.

Practical ski trip pack with three grip waxes that cover most temperatures. Contains: V40 Blue Extra, V45 Violet Special, V60 Red/Silver, synthetic cork and wax/klister scraper. A nice gift pack! - Ski trip pack - For all dry wax conditions - For those who want a better skiing experience - Everything you need to achieve good grip

Robust racing file guide, 87° - Tool for side edges - For filing steel edges - For alpine skiers and snowboarders - Extremely precise

6”/15 cm. 16 tpcm. Fine. Non chromed file. Works great for side-edge beveling.

Aluminum World Cup file guide for side edges, 1.0°. For filing steel edges. - File guide - For filing base edges - For alpine skiers and snowboarders - Extremely precise

Side edge file guide in handy pocket size and ergonomic design for a secure grip. The side edge can be set to either 87 or 88 degrees. 40mm quality file included - 40mm quality file included

Natural cork for polishing Cera F and glide wax. Used to cork wax into the base.

HS7 performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end-result. Can be used as a racing wax at low air humidity, but will also serve the purpose as a brilliant training wax. The speed of the iron should be approx. 8-10 sec. on a skating ski or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HS7 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 150°C (302°F). Highlights: - Fantastic allround-glider - For training and competition - Great performance and durability - Fluoro-free and non-toxic - Well tested on many conditions

Handy size thermometer to measure snow temperature. - Solid plastic protective case - Scaled from -30 to +50 Celsius degrees - Perfect when travelling

Medium coarse file, chrome-plated. 20 cm, 14 tpcm. Good for filing both side edges and base edges. - File for treating steel edges - For snowboards and alpine skis - For alpine skiers and ski workshops - Sharp and exact

Fluor Free The F4 series of universal gliders gives you good glide quickly and easily. - Easy wax for all conditions - No iron needed F4 Universal All Temperature Paste wax on tube. For skis and snowboards. All snow conditions. With foam applicator. Apply and go! Special tip: Use F4 Combi Brush (T0166B). Polish with the felt and then brush lightly. Based upon Future Cera® raw materials, which grant for high quality and an environmentally friendly profile.

PS7 is a wax that performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end result. PS7 is an economic training and racing wax as well as an all-round base prep wax. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 140°C (284°F). - Recommended iron temp: 140°C (284°F). - Replaces the CH7X. - -2°C to -8°C (28°F to 18°F).

Transparent polyethylene sticks for repairing ski bases. Easy to work with. Ø 6 mm. 4 sticks per pack. First clean the damaged area in the base and scrape out any loose residue. Heat the polystick and drip into the damaged area in the base. Let it cool down and scrape away the excess with a steel scraper, or panzer file if necessary, and polish over with Fibertex for a fine finish. - Polyethylene Stick - For repairing ski bases - For racing service and ski workshops - Easy to work with

A great wax for both base-prep and training. It can also be used as a race wax, preferably used with a top coat. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 150°C (302°F). Replaces the LF8X. Highlights: - Easy to work with - For training and competition - Great performance and durability - Fluoro-free and non-toxic - Well tested on many conditions

2nd cut. Medium coarse file, chrome-plated. 20 cm, 16 tpcm. The best “all round” file Swix has. Used for filing side edges and base edges. - File for treating steel edges - For snowboards and alpine skis - For alpine skiers and ski workshops - Sharp and exact

Attach the Fibertex to an oval or rectangular brush. Move the brush back and forth on the surface of the base. When the gray lining is gone, you’re done. For removing microhairs we recommend approx. 50 brush strokes back and forth. - Pack of three sandpapers 110 x 150 mm - Aluminum oxide abrasive particles

Aluminum file guide for base edges, 1°. - File guide - For filing base edges - For alpine skiers and snowboarders - Precise